G.W. Tractors Australia

  • Call us on 1800 062 790
  • Home
  • Used Machinery
    • Used Fiat Bulldozers For Sale
    • Used Tractors For Sale
  • Tractor Parts
    • Case IH
    • David Brown
    • Deutz
    • Fiat
      • Fiat 411R
      • Fiat 415
      • Fiat 450
      • Fiat 640
      • Fiat 650
      • Fiat 750
    • Ford
    • John Deere
    • Landini
    • Massey Ferguson
      • Ferguson TE20
    • McCormick
    • New Holland
      • T6000 Series
        • T6020
        • T6050
        • T6070
        • T6080
      • 8970
      • TD80D
      • TS100
      • TT75
    • Zetor
    • Classic & Vintage Tractors
    • All Makes
    • Accessories
  • Fiat Bulldozer Parts
  • Workshops / Mechanics
  • Wrecking
    • Tractor Wrecking
      • Fiat
      • New Holland
    • Bulldozer Wrecking
  • About & Contact
    • News
    • Contact Us
You are here: Home / New Holland T6080 Tractor Information

New Holland T6080 Tractor Information

Overview & History

Manufactured in Basildon, England from 2007 then discontinued in 2012, the New Holland T6080 was the range-topping model until the T6090 came along.

Photo: New Holland T6080

Just like the other four Elite models in the T6000 series, the T6080 was fitted with New Holland’s NEF FPT six-cylinder, 24-valve engine. It featured a high-pressure common-rail (HPCR) fuel system to achieve Tier 3 emissions compliance. This engine was known to have improved the tractor’s efficiency and consistency thanks to two features: Electronic Power Management (EPM) and Engine Speed Management (ESM).

Electronic Power Management (EPM) was where the common rail engine makes sure that each injector unit ran at maximum efficiency. When working with electronic engine management, the boost feature can then provide an additional 34hp in PTO or transport applications.

Meanwhile, ESM let the operator set their desired engine speed with the boost feature, which will keep the tractor running at that speed even when conditions changed.

The New Holland T6080 had the power command transmission with 18 forward and six reverse gears. With this, operators had unobstructed shifting from gear one through to 19.

This tractor’s hydraulics provided 100 litres per minute flow. There were four rear remotes operated by electro-hydraulic remote valves. Each lever had individual flow control, and timing to each valve can be configured from inside the cab.

The T6080’s rear lift capacity reached over 5,000 kilogrammes. The T6080 had longer linkage arms compared to other tractors, which allowed operators to get between the rear wheel and the implement to safely adjust and hitch successfully.

The PTO speed options were 540 and 1,000, and operators can change between the two using the stick on the right-hand side at the rear of the cab. The T6080 also had an auto PTO that automatically disengaged the PTO when the rear linkage was raised above a pre-set point to protect the PTO shaft and tractor. The system will then re-engage the drive when the rear linkage was lowered.

The T6080 came standard with the “Terraglide” front suspension and “Comfort Ride” cab suspension. However, the super steer front axle was negated when the tractor ran at higher speeds, though the cab suspension remained active.

Just like the other recent Elite models before it, the T6080 had a large four-post cabin that was open, light, and well-laid out. It had an armrest that was evaluated to be basic, uncomplicated, and practical. It also incorporated the transmission control, throttle, draft controller, and a cup holder.

The transmission controller was in a comfortable position, and the linkage raise/lower switch, gear shift up/down, and headland management control were all under the thumbs control.

Aside from these notable specs, the New Holland T6080 was well-regarded for its 600-hour service interval, which was double the other brands of its time. This meant that operators of this tractors will benefit in lower running costs and less downtime.

Daily checks were easy to do as well, because of the easy access to the engine and all service points, including the radiator. The rear transmission oil can be observed with a site glass. And instead of a traditional dipstick, the engine oil level was mounted inside the filling cap.

With a large range of features, the New Holland T6080 makes a reliable machine for long days on the farm.

New Holland Replacement Parts

G.W. Tractors specialises in sourcing replacement parts for all New Holland models. Call us on 1800 062 790 to find tractor parts for your New Holland T6080. We may also have New Holland T6080 tractors in our yards for wrecking, and if we do they will appear below. Check out all the tractors we are wrecking.

Who should buy a New Holland T6080

The New Holland T6080 is a reliable tractor that works best in mostly flat areas.

Buy a used New Holland T6080

G.W. Tractors is the best place to buy a used New Holland T6080 in Australia. If we don’t have any in stock at the moment, give us a call on 1800 062 790 and we have a better chance than anyone else of finding you one. Below are the used New Holland tractors we have in our yards now. Check out all of our used tractors for sale.

New Holland T6080 Specs

SeriesT6000 SeriesYears Made2007-2012
Type/sRow-crop tractorFactoryBasildon, England
Series BackT6070Engine OverviewFPT 6.7L 6-cyl diesel
Engine Capacity410.6 ci [6.7 L]Cylinders6
CoolingLiquid-cooledFuelTurbocharged air-to-air intercooled diesel
Bore/Stroke104 x 132 mm [4.094 x 5.197 inches]Fuel SystemHigh pressure common rail (HPCR)
Air cleanerDual paper elements and aspiratorCompression17.5:1
Rated RPM2200Starter TypeElectric
Starter Volts12Oil Capacity15.1 L [16 qts]
Fuel Capacity300.2 L [79.3 gal]3-Point Hitch Rear Type2/3N
Rear Lift5,527 kg [12,185 lbs]3-Point Hitch ControlElectronic lower-link draft control
Engine Power166 hp [123.8 kW]Drawbar (tested)103.5 hp [77.2 kW]
PTO (tested)149.7 hp [111.6 kW]Transmission typeFull power shift
Gears18 forward and 6 reverseClutchHydraulic wet disc
Rear PTOIndependentRear RPM540/1000 (1.375)
Tyres – Front Tread157 to 233 cm [62.2 to 92 inches]Weight (Operating)6,615 kg [14,585 lbs]
Wheelbase273 cm [107.8 inches]
SuperSteer – 289 cm [113.8 inches]
Chassis4×4 MFWD 4WD
SteeringHydrostatic powerBrakesDifferential hydraulic wet disc
CabHorizon cab standard with air-conditioning. Optional deluxe cab with automatic temperature control and air-ride seat. Optional Comfort Ride cab suspension. Programmable headland management system.Hydraulics TypeClosed center load sensing
Hydraulics Capacity70 L [18.5 gal]Pump Flow100.3 lpm [26.5 gpm]
Total Flow165 lpm [43.6 gpm]Electrical GroundNegative
Charging SystemAlternatorCharging Amps120
Charging Volts12Battery Volts12

Accessories, consumables and more

G.W. Tractors also has a huge range of accessories and consumables for all makes and models of tractors. We have everything you need to keep your tractor working.

Welcome to G.W. Tractors

G.W. Tractors Pty Ltd is a family-run business that has been providing aftermarket spare parts and used bulldozers and tractors to Australian farmers and repairers for the last 35 years.

Contact Us

Get the parts you need fast. Call the parts people today on 1800 062 790, email us or visit us in Brisbane or Melbourne.

Fiat & New Holland Specialists

G.W. Tractors are specialists in Fiat tractor parts, Fiat bulldozer parts and used Fiat tractors and bulldozers. We also stock a huge range of aftermarket New Holland tractor parts.

Original equipment manufacturers names and parts numbers are quoted for reference purposes only and are not intended to suggest that our replacement parts are made by the original equipment manufacturer.

© 2021 | G.W. TRACTORS (QLD.) PTY. LTD. | ACN: 010 325 112 |Registered Office: 14 Westerway Street, Slacks Creek QLD 4127