Overview & History
Built from 1999 through to 2003 in Basildon, England, the New Holland TS100 tractor–along with other models from the TS series–was based on Ford’s 40 series. It is available in two- and four-wheel drive.
The TS100 was equipped with a New Holland Genesis engine, which was first introduced in 1993 when Ford New Holland unveiled its 70 series of tractors. But unlike the 6-cylinder engine in the 70 series, the one in the TS100 has 4 cylinders.
With an engine power of 100hp and liquid-cooling, the TS100 is versatile for many farm duties, such as carrying loads and tilling, yet small enough for easy storage.
This tractor is cab optional, but the standard ROPS will keep you safe when navigating rough terrain. As for the transmission, the TS100 is fitted with Synchro Command, which has 12 forward and reverse gears. There are four gears provided in each of the three ranges, and the transmission features a shuttle lever.
With this transmission system, the tractor may be shifted while moving, using the clutch, between gears, high or medium range, and forward-reverse shuttle. However, the tractor must be stopped before going into low range.
The TS100’s hydraulic’s system comes in open as a standard, though closed-load sensing system was available as an option. With two to four valves equipped, it can pump out up to 80 litres per minute, maximising the tractor’s efficiency, especially considering that the steering flow output is 140 litres per minute.
Other features of the TS100 include a 159-litre fuel capacity; 1,905-kilogram rear-lift capacity, and even higher when equipped with assist rams; and independent rear PTO. This tractor also has hydrostatic power steering and hydraulic wet disc brakes. These brakes are better than other types in just about every aspect, particularly in efficiency–meaning you can apply less pressure at the lever for the same braking power.
New Holland Replacement Parts
G.W. Tractors specialises in sourcing replacement parts for all New Holland models. Call us on 1800 062 790 to find tractor parts for your New Holland TS100. We may also have New Holland TS100 tractors in our yards for wrecking, and if we do they will appear below. Check out all the tractors we are wrecking.
Who should buy a New Holland TS100
The New Holland TS100 is a versatile machine that can be used in almost every application.
Buy a used New Holland TS100
G.W. Tractors is the best place to buy a used New Holland TS100 in Australia. If we don’t have any in stock at the moment, give us a call on 1800 062 790 and we have a better chance than anyone else of finding you one. Below are the used New Holland tractors we have in our yards now. Check out all of our used tractors for sale.
New Holland TS100 Specs
|Series||TS Series||Years Made||1999 to 2003|
|Factory||Basildon, England||Previous Model||New Holland 6640|
|Series Back||New Holland TS90||Series Next||New Holland TS110|
|Engine Overview||New Holland 5.0L 4-cyl diesel||Engine Capacity||304 ci [5.0 L]|
|Fuel||Turbocharged diesel||Bore/stroke||112 x 127 mm [4.40 x 5.00 inches]|
|Firing Order||1-3-4-2||Engine Oil Capacity||11.4 L [12 qts]|
|Fuel Capacity||159 L [42 gal]||3-Point – Hitch Rear Type||II,IIN|
|Rear Lift||1,905 kg [4,200 lbs]|
With assist ram – 2,816 kg [6,210 lbs]
With two assist rams – 3,737 kg [8,240 lbs]
|Engine Power||100 hp [74.6 kW]|
|PTO (Claimed)||80 hp [59.7 kW]||Transmission Gears||12 forward and reverse|
|Transmission Oil Capacity||56.8 L [60 qts]||Rear PTO||Independent|
|Rear RPM||540/1000||Front Tyres – Standard||7.50-16|
|Rear Tyres – Standard||16.9-30||Weight (Operating)||2WD – 3,299 kg [7,275 lbs]|
4WD – 3,749 kg [8,267 lbs]
2WD cab – 3,929 kg [8,267 lbs]
4WD cab – 4,470 kg [9,855 lbs]
|Length||2WD – 381 cm [150.2 inches]|
2WD – 403 cm [158.9 inches]
|Wheelbase||2WD – 233 cm [92.1 inches]|
4WD – 236 cm [93 inches]
|Width||Cab – 201 cm [79.2 inches]|
Tires only – 195 cm [76.9 inches]
|Height – Overall||ROPS – 288 cm [113.7 inches]|
Cab – 271 cm [106.8 inches]
|Ground Clearance||39 cm [15.5 inches]||Chassis||4×2 2WD|
4×4 MFWD 4WD
|Steering||Hydrostatic power||Brakes||Hydraulic wet disc|
|Cab||Cab optional||Hydraulics Type||Open|
Closed load sensing optional
|Pressure||2500 psi [172.4 bar]|
2700 psi [186.2 bar]
|Pump Flow|| 36.7 lpm [9.7 gpm]|
68.9 lpm [18.2 gpm]
79.5 lpm [21 gpm]
|Total Flow||140 lpm [37 gpm]||Electrical Charging System||Alternator|
|Number of Batteries||1|
Accessories, consumables and more
G.W. Tractors also has a huge range of accessories and consumables for all makes and models of tractors. We have everything you need to keep your tractor working.